Skip to main content
Apply

Engineering, Architecture and Technology

Open Main MenuClose Main Menu

About Dr. Raman P. Singh

Dr. Raman P. Singh serves as the Associate Dean for Engineering at OSU-Tulsa and as the Head of the School of Materials Science and Engineering in the College of Engineering, Architecture and Technology at Oklahoma State University (OSU). He also serves as the Director of the Helmerich Advanced Technology Research Center on the OSU-Tulsa campus and is appointed as the Helmerich Family Endowed Chair Professor of Engineering. Raman holds M.S. and Ph.D. degrees in Mechanical Engineering and Applied Mechanics from the University of Rhode Island, and a B.Tech. degree in Mechanical Engineering from the Indian Institute of Technology--Kanpur, India. Prior to joining OSU in 2006 he was a faculty member at the State University of New York at Stony Brook, and before that a post-doctoral scholar at the California Institute of Technology.
Raman's research interests are in the failure mechanics of advanced and complex material systems, with an emphasis on the development of new techniques for material failure characterization. His academic interests are in recruiting, mentorship, and retention of non-traditional and underrepresented student groups. His research has been funded by the National Science Foundation, NASA, the Oklahoma Center for the Advancement of Science & Technology, the Oklahoma Transportation Commission, the US Army Research Office, the Department of Energy, and industry. He has authored or co-authored several archival journal publications and conference proceedings, and holds two patents. He is an active member of the Society of Experimental Mechanics (SEM) and the American Society of Mechanical Engineers (ASME). He serves as an Associate Technical Editor for Experimental Mechanics. Besides academia, Raman enjoys travel, restoring cars, backpacking, and photography.
Dr. Raman P. Singh

Google Scholar Profile

Selected Publications

  1. Mishra K., and Singh, R.P.,``Influence of self-assembled compliant domains on the polymer network and mechanical properties of POSS-epoxy nanocomposites under cryogenic conditions,' European Polymer Journal, 116C, 283-290, 2019. http://dx.doi.org/10.1016/j.eurpolymj.2019.02.034
  2. Mishra K., and Singh, R.P.,``Effect of APTMS modification on multiwall carbon nanotube reinforced epoxy nanocomposites,'' Composites Part B: Engineering, 162, 425-432, 2019. http://dx.doi.org/10.1016/j.compositesb.2018.12.134
  3. Babu, L.K.; Mishra, K.; and Singh, R.P.; “Near-Fiber Effects of UV Irradiation on the Fiber-Matrix Interphase: A Combined Experimental and Numerical Investigation,” Materials & Design, 157(5), 294-302, 2018. https://doi.org/10.1016/j.matdes.2018.07.050
  4. Mishra, K. and Singh, R.P., “Quantitative Evaluation of the Effect of Dispersion Techniques on the Mechanical Properties of Polyhedral Oligomeric Silsesquioxane (POSS)-Epoxy Nanocomposites, “ Polymer Composites, 39(S4), E2445-E2453, 2018. http://dx.doi.org/10.1002/pc.24744
  5. Babu, L.K.; Mishra, K.; Hamim, S.U.; and Singh, R.P.; “Effect of Excess Silane on the Visoelastic Behavior or Epoxy Under Hygrothermal Conditions,” International Journal of Adhesion and Adhesives, 84, 80-85 (2018) https://doi.org/10.1016/j.ijadhadh.2018.03.002
  6. Mishra, K.; Pandey, G.; and Singh, R.P.; “Enhancing the Mechanical Properties of an Epoxy Resin Using Polyhedral Oligomeric Silsesquioxane (POSS) as Nano-reinforcement,” Journal of Polymer Testing, 62, 210-218 (2017) https://doi.org/10.1016/j.polymertesting.2017.06.031
  7. Zunjarrao, S.C.; Dyjak, P.; Rahman, A.; Metzger, J.D.; and Singh, R.P.; “Microwave Processing of Polymer Derived Ceramics from Actively Seeded Precursor,” Journal of the American Ceramics Society, 5, 7, 2978-2988 (2017) http://dx.doi.org/10.1111/jace.14182
  8. Rahman, A.; Zunjarrao, S.C.; and Singh, R.P.; “Effect of Degree of Crystallinity on Elastic Properties of Silicon Carbide Fabricated Using Polymer Pyrolysis,” Journal of the European Ceramics Society, 36, 14, 3285-3292 (2016) https://doi.org/10.1016/j.jeurceramsoc.2016.06.010
  9. Hamim, S.U. and Singh, R.P., “Taguchi-based Design of Experiments in Training POD-RBF Surrogate Model for Inverse Material Modeling using Nanoindentation,” Inverse Problems in Science & Engineering, 25, 3, 363-381 (2016) http://dx.doi.org/10.1080/17415977.2016.1161036
  10. Hamim, S.U. and Singh, R.P., “Effect of Hygrothermal Aging on the Mechanical Properties of Fluorinated and Non-fluorinated Clay-Epoxy Nanocomposites,” International Scholarly Research Notices, 2014, Article ID 489453 (2014) http://dx.doi.org/10.1155/2014/48945
MENUCLOSE